TOYO LIVING CO.,LTD.

Company Name:

TOYO LIVING CO.,LTD.　Sales Department

Representative's name:

Yuichi Kudo

Location:

Office Tower 22F, 1-6-1, Kamiooka Nishi, Konan-ku, Yokohama, JAPAN

Tel:

+81-45-841-5511

Fax:

+81-45-843-3611

E-mail:

URL:

https://www.toyoliving.co.jp/skinimg/superdry_en.pdf

Products:

“SUPER DRY” (DP series, Ultra series, Standard series, M-Temp series, HEPA series, Feeder series), AUTO CLEAN DRY, AUTO DRY, FLAT DRY, MOBILE DRY

Sales Points:

“SUPER DRY” is an automatic low humidity desiccator in which TOYO LIVING’s Technologies are fully packed. We offer extensive lineup of “SUPER DRY”. We also produce custom-made “SUPER DRY” according to customer requirements.

[Features of “SUPER DRY”]
1. By far the best performance in low humidity
Due to the original highly reliable dry unit (Patent pending) and its dehumidifying method (Patent registered), “SUPER DRY” demonstrates innovative performances in low humidity and low dew point temperature.
The minimum humidity ( dew point temperature ) is 0-1%RH ( -43°C ) for Standard Series, 0%RH ( -45°C ) for Ultra Series, and 0%RH ( -55°C ) for DP Series.

2. Remarkable performance of dehumidification
Humidity returns low rapidly after opening and closing the doors.
Especially, “SUPER DRY” with two dry units are superior in high recovery capability which demonstrates excellent effect in manufacturing process during frequent opening and closing doors.

3. Outstanding effect of energy saving
Due to the original dry unit (Patent pending) and the humidity control system by microcomputer (Patent registered), achieved the lowest power dehumidification operation. As a result, the electricity charge was reduced to 1/3 compared to other company’s product.

4. Quality of electronic components
Storing electronic components in the “SUPER DRY”, prevents storage items such as micro-crack of IC packages, peeling of multilayer PCB and defects of FPC and F/R from moisture damages. “SUPER DRY” can achieve quality improvement, reduction of process, and cost reduction on the manufacturing process.

5. Standard specifications
(1)Humidity control system by microcomputer (Patent registered)
(2)Conforms to the standard of conducting IC packages, "IPC/JEDEC J-STD-033D".
(3)The cabinet and shelves are provided with antistatic coating. The power code is equipped with ground wire which has 1M-Ohms resistance.
Conforms to "ESD-IEC61340-5-1"
(4)All components are in compliance with RoHS2.

[Extensive lineup of “SUPER DRY”]
1. “SUPER DRY” DP Series
The dew point temperature of DP series achieved -55°C.
DP series quickly returns to low dew point temperature after opening and closing the doors. It is suitable for storing items such as SMD, semiconductors, electronic components and components for lithium-ion battery and organic electro-luminescence.

2. “SUPER DRY” Ultra Series
Minimum humidity of Ultra Series is 0%RH and can safely store items at low humidity.
The electronic two dry units are controlled by microcomputer (Patent registered)
Since the Ultra Series is equipped with two units, the other unit dehumidifies while one unit is being heated and regenerated. Ideal for manufacturing process during frequent opening and closing doors.

3. “SUPER DRY” Standard Series
Standard series can be safely stored items at normal temperature and low humidity. The internal humidity of Standard series can be set 1-50%RH. Minimum humidity of Standard series is 0-1%RH. Humidity setting is available with a digital panel. No need to open a door for setting. The electronic dry unit which is made in Japan is controlled by microcomputer. (Patent registered)

4. “SUPER DRY” M-Temp2
M-Temp2 demonstrates the best performance for dehumidification (Minimum humidity: 0-1%RH) with the function of warming heater (Max 50°C).
M-Temp2 is especially suitable for "Dry Bake method" instead of using the high-temperature furnace. This is ideal for dehumidification of LED, PCB, and wafer. It will reduce failure rate significantly.

5. “SUPER DRY” HEPA Series
HEPA Series accomplished ISO Class5 in the classification of clean room.
HEPA series can also be used as a mini clean room.
Forced convection system returns inside the cabinet to clean in a few minutes after opening and closing the doors.
The minimum humidity of HEPA Series is 0-1%RH.

6. “SUPER DRY” Feeder Series
Feeder Series can maintain low humidity while storing feeders with tape reels for mounting process. Removal of the reel from the feeder is unnecessary. Capable of storing various types of tape reel.
The minimum humidity of Feeder Series is 0 %RH.

Images: